Drive Voltage: YG can flexibly customize the maximum drive voltage of the device. The common available options for the maximum drive voltage we provide are 50V, 75V, 100V, 120V, and 150V. Other special maximum drive voltages can also be customized flexibly according to customer requirements.

Output Displacement: The output displacement is primarily determined by the length of the device. YG offers a maximum displacement range of up to 200μm.

Operating Frequency: The long-term operating frequency of the stack depends on factors such as the resonant frequency of the device and the drive voltage. YG can flexibly design according to customer requirements. The maximum drive frequency for the stack can reach up to 30kHz.

Dimensions: The inner diameter, outer diameter, and height of the annular stack can be customized flexibly according to customer needs. For the outer diameter, the minimum available size is 3mm, and the maximum is 20mm. For the inner diameter, the minimum available size is 1 mm, and the maximum is 10mm. In terms of height, customization up to 90mm is supported.

Wiring Harness: A wiring harness can be optionally equipped while meeting the AWG usage standards. The standard length of the harness is 7.5 cm of tinned wire, and both the length and orientation of the harness can be customized flexibly according to customer requirements. To facilitate the connection of positive and negative electrode wires, the soldering point position can be selected within the allowable error range of performance variation.

A closed-loop version is available.